Blacksmith Drift Set Blacksmithing Knifemakers Tomahawk Ax and Mouse Hammer Drift For Forging Tongs, Hammer, Axe (3 Pcs)

About this item

🔨Blacksmiths is to drill a series of small holes to handle hand-made hammers, ax, or tomahawks, etc. Once the holes are drilled heat, the item and use a cold chisel or similar tool to split the piece. Once split, heat the piece again and drive the drift through the hole. Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift hole gets to the desired measurement. The process of heating may be needed several times to get the desired shape.
🔨These are 3pc Drift Sets. The size of the drift refers to picture 3.
🔨The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock when you drive the drift.
🔨If the drifts ever bend, you can simply bring them up to low heat, straighten them with light hammer blows, and allow them to air cool.
🔨Made of high-grade steel with strong and durable.